礦ision Build Log
Project:
F:\鼎实技术支持\1.产品资料下载\14.  嵌入式PROFINET接口板卡\M1-PN-V2.0板卡\PN板卡评估板程序SPI和串口\PN板卡评估板程序V2.1\DSPN_MSPI.uvproj
Project File Date:  09/15/2021

Output:
Build target 'DSPN-Modbus-spi'
compiling Modbus_SPI.c...
linking...
Program Size: Code=9728 RO-data=1360 RW-data=1272 ZI-data=22592  
FromELF: creating hex file...
".\Obj\DSPN_Modbus-SPI.axf" - 0 Error(s), 0 Warning(s).
Load "F:\\鼎实技术支持\\1.产品资料下载\\14.  嵌入式PROFINET接口板卡\\M1-PN-V2.0板卡\\PN板卡评估板程序SPI和串口\\PN板卡评估板程序V2.1\\Obj\\DSPN_Modbus-SPI.axf" 
Set JLink Project File to "F:\鼎实技术支持\1.产品资料下载\14.  嵌入式PROFINET接口板卡\M1-PN-V2.0板卡\PN板卡评估板程序SPI和串口\PN板卡评估板程序V2.1\JLinkSettings.ini"
* JLink Info: Device "STM32F103ZE" selected (512 KB flash, 64 KB RAM).
 
JLink info:
------------
DLL: V4.80g, compiled Feb 13 2014 20:50:02
Firmware: J-Link V9 compiled Dec 13 2019 11:14:50
Hardware: V9.70
S/N : 150718488 
Feature(s) : GDB, RDI, FlashBP, FlashDL, JFlash 
 
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103ZE
VTarget = 3.306V
State of Pins: 
TCK: 0, TDI: 0, TDO: 0, TMS: 1, TRES: 1, TRST: 0
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.